
Published: .
Technical review: pending. The responsible closure supplier and project reviewers must confirm tooling identity, sample scope and acceptance requirements.
A sample parcel contains several apparently identical flip-top caps. The team finds a difference on one sample, but no one can connect that cap to the supplier’s manufacturing record. Sending another photograph of the assembled tube may show the concern while leaving the source of the sample unresolved.
A facial cleanser cap cavity sample roster gives that review an identification structure. It connects the closure reference, supplier-declared tooling information, sample groups and observations. The decision is whether the supplied sample set is sufficiently identified for the review you have requested. It is not a mould qualification standard, a statistical sampling plan or evidence that an identified cavity produces acceptable parts.
Establish the Closure Reference First
Name the Cap Separately from the Tube
Begin the facial cleanser tube packaging enquiry with a cap drawing or supplier reference, its revision, colour request and intended matching tube. The product name alone does not distinguish two similar closures. If there is an approved reference sample, identify it without treating every later sample as an equivalent replacement.
For custom facial cleanser tubes, record whether the proposed closure is an existing component, a modification or a new development. Ask the supplier to confirm that description. The answer affects what information can accompany samples; it does not establish who owns any mould or promise that a particular tooling record can be disclosed.
Clarify What the Supplier Means by a Cavity
Protolabs’ explanation of family and multi-cavity moulding distinguishes tools making multiples of the same part from tools making different component designs. That general distinction explains why a buyer should clarify the sample source. It does not establish the cavity count or manufacturing arrangement for any Xinfly closure.
Ask the actual supplier which component and tool the declared identifiers refer to. If a closure contains separately produced parts, request an explanation of how their identities connect to the supplied assembly. Avoid creating a single cavity field that silently combines unrelated components.
Ask How Identification Will Be Preserved
Do Not Assume Every Small Mark Is a Cavity Number
A moulded mark may have a meaning defined by the component supplier. Photograph its location and ask for a legend. Record exactly what the supplier confirms rather than interpreting an isolated numeral, letter or circular feature as a cavity identifier.
Ask whether the information is present on the part, its controlled sample packaging, a supplier record or another agreed reference. If no cavity-level identification is available, retain that limitation. A clear statement of unavailable information is more useful than a roster filled with guessed identifiers.
Agree the Sample-Group Labels before Dispatch
Request a label format that receiving can preserve without altering the closure. The supplier should connect each sample group to its declared identifier and relevant production or trial reference. Confirm how groups will remain distinguishable while packed, inspected and retained.
Do not specify new marking on a closure without supplier review. A label on an external sample sleeve and a permanent mark on a moulded component are different requests. Agree the practical identification method and quote any requested extra work separately from the base component enquiry.

Build the Sample Roster with the Supplier
| Roster field | Supplier clarification to request | Receiving record to preserve |
|---|---|---|
| Closure identity | Component code, drawing revision and assembly description | Item and revision actually received |
| Tool reference | Identifier the supplier can disclose and its scope | Exact supplied reference or stated limitation |
| Cavity identification | Declared identifiers and explanation of their meaning | Original labels and any confirmed part marks |
| Sample source | Trial or production reference and collection context | Dispatch reference linked to the parcel |
| Group quantity | Quantity proposed for each identified group | Actual received count per group |
| Assembly state | Loose closure or fitted assembly and relevant matching parts | Condition received before handling |
| Information gaps | Unavailable or unresolved identity fields | Named owner and pending clarification |
Use one row per agreed sample group in your project file. The table above describes fields, not a required number of groups or samples. Ask the responsible quality and engineering teams to define the sample scope needed for the actual decision. A generic article cannot determine how many samples are sufficient.
Separate Coverage from Acceptance
Check the Declared Set against the Requested Set
If your project requests samples associated with specified declared identifiers, reconcile the requested list with the received list. Show missing groups, substituted groups or groups awaiting explanation. Do not interpret a complete roster as proof that the whole manufacturing process has been evaluated.
Equally, do not infer the number of cavities from the number of caps in a bag. Several samples can come from one declared group, and a mixed bag may not preserve group identity at all. Request clarification from the supplier instead of assigning identifiers in order of unpacking.
Keep Sample Quantity Decisions with the Review Plan
The sample roster should refer to the project’s agreed review plan, including who selected the quantities and for what purpose. If that plan changes, record the revision and ask whether additional samples are required. Keep any retained-reference allocation visible so those units are not accidentally consumed during another activity.
A closure sample development request can include this identification requirement from the beginning. Confirm whether the supplier can provide the requested grouping and associated information, what is included in the quotation and which parts of the review your own team must arrange.
Receive Samples without Losing Their Connections
Record the Parcel before Redistributing Its Contents
Check the supplied roster against the labelled groups as received. Preserve the original labels and dispatch reference. Photograph the overall arrangement where useful, then give each receiving group a controlled internal reference that points back to the supplier’s identification.
If another team needs a subset, record the transfer and keep its parent group visible. Avoid pouring all closures into one tray before the identification check is complete. This is a proposed sample-handling control, not a cleanliness or manufacturing instruction, and should fit your organisation’s actual procedures.
Keep Unidentified Samples in a Separate Category
An unlabelled cap may still be useful for a limited visual discussion, but it cannot support a cavity-specific statement without confirmed identity. Record the sample as unidentified and state what it may be used to discuss. Ask the reviewer whether a replacement sample or a narrower review is appropriate.
Do not retroactively attach a cavity label simply because an unidentified cap resembles another cap. Record any later identification as a dated supplier clarification. The history should show what was known at the time an observation was made and what was confirmed afterward.
Connect Observations to Individual Samples or Groups
State the Resolution of Your Record
Decide whether an observation is attached to a particular sample or to an identified group. If your record only distinguishes groups, avoid language implying that each individual unit has a unique traceable identity. Describe the actual level of control used during the review.
For 100ml face wash tubes with flip-top caps, also preserve the matching tube reference when a cap is reviewed as part of an assembly. An observation about a fitted cap should not be filed as though it concerned a loose cap alone. Identify who assembled it and any applicable assembly record.
Preserve Observations without Diagnosing the Mould
Record what was observed, where, by whom and under which agreed review conditions. Refer to the applicable image, measurement or procedure record. Send concerns to the supplier and designated technical reviewers for interpretation instead of naming a cavity as the cause of a problem from one observation.
The caps and closures catalogue can help communicate the closure form under discussion. It does not identify the source of your specific sample or provide a cavity-level approval. Keep the live product reference and the project’s actual sample evidence connected but distinct.

Use an Exception Record That Leads to a Reply
| Situation | Record with the question | Requested response |
|---|---|---|
| Declared group is missing | Requested roster and actual received group list | Confirm omission and proposed next action |
| Label and part mark appear inconsistent | Images of both and the supplier’s existing legend | Clarify meaning and correct the controlled record |
| Samples arrived mixed | Parcel reference and preserved receiving evidence | Explain available identification and propose recovery |
| Observation concerns an assembled cap | Cap, tube and assembly references with the observation | Review the concern within the stated assembly scope |
| Tool or component reference has changed | Old and new references with revision dates | State the change and the proposed sample coverage |
| Identity remains unavailable | Explicit limitation and intended review decision | Confirm what can be supported and what remains pending |
Do not turn this worksheet into a universal supplier score. Its purpose is to obtain an answer tied to a recoverable sample. The project reviewer should decide whether the answer is sufficient for the intended decision or whether the sample review must remain qualified.
Prepare Approval Wording that Matches the Evidence
Identify the Actual Scope of the Decision
A useful review conclusion names the closure revision, supplied sample groups and question evaluated. It records limitations and the person or function responsible for the disposition. Keep sample identity review separate from any conclusion about fit, opening, leakage or another performance question.
If the team has only checked that the roster matches the parcel, say so. If technical work has been completed, link its actual record and scope. A single “approved” stamp without those distinctions can later be mistaken for acceptance of every tool, cavity, production run or matching tube variant.
Revisit Identification When the Supply Proposal Changes
Ask what should happen if the supplier proposes another tool, another component revision or another manufacturing source. Agree the notification and review route in the project file. Do not assume that a familiar commercial cap name describes an unchanged source indefinitely.
On a reorder, request confirmation of the references covered by the previous decision. Where confidentiality limits the detail available to purchasing, ask the responsible teams to agree a workable controlled reference. Record the limit rather than inventing access to internal tooling information.
Send Xinfly Packaging an Identifiable Sample Request
Include the proposed cleanser application, tube and closure references, requested capacity, colour, drawing revisions and the decision the samples must support. Add your proposed roster fields and ask which identifiers and grouping arrangements can be provided. Confirm the actual sample quantities, commercial scope and review responsibilities with the supplier.
The illustrations show an ivory PE-style cleanser tube with a moulded shoulder, straight sealed tail, closed teal flip cap and teal screen-print-style branch artwork. The labelled paper sleeves are illustrative organisation props. They do not show actual cavity marks, a particular mould, physical inspection findings or a completed qualification.
Frequently Asked Questions
Does a Number under a Cap Always Identify Its Cavity?
No. Ask the component supplier to explain the mark and its scope. Preserve the confirmed legend and location. Do not assign meaning from appearance alone.
How Many Samples Should We Request per Cavity?
The responsible technical and quality teams should decide the scope for the actual review. This roster is an identification tool and supplies no statistical sample-size rule or universal approval quantity.
Can We Use a Mixed Bag of Caps for Cavity-Specific Review?
Only if an agreed method preserves the necessary identity. Otherwise record the limitation and ask whether new identified samples or a narrower review is appropriate.
Does a Complete Roster Qualify the Mould?
No. It records sample identity and declared coverage. Mould qualification, process capability and closure performance require their own appropriate evidence and authorised decisions.
What If the Supplier Cannot Disclose a Tool Number?
Ask which controlled reference can connect the samples and subsequent response. Have the responsible team decide whether that level of identification supports the intended decision, and retain any limitation.
Conclusion
Before asking a supplier to explain a closure-sample concern, make sure the sample can be identified. Agree the component reference, declared source information, grouping method and observation links in a cavity sample roster. Use it to request a precise response from Xinfly Packaging while keeping technical acceptance and manufacturing conclusions within their actual evidence scope.


